« Back to blog

Adjustment of Slipping/Sticking Sliding Shelves

The problem with sliding shelves slipping off the cabinet wall supports or sticking is easily resolved.

  1. Remove the offending shelf from the cabinet (remove the bottles, pull the shelf out to its fullest extent, lift the front of the shelf to 30º from horizontal, lift the shelf clear).
  2. Observe that the platform of the shelf is attached to its runners by 2
    (Comfort/Classic range) or 3 (Compact range) small bolts on each side.
  3. Loosen the bolts (do not fully undo because they will be difficult to replace)
  4. Spread the runner as far from the platform as the small adjustment area permits; expect no more than 1 or 2 mm movement.
  5. Tighten the bolts taking care to prevent the act of tightening drawing the runner back in toward the shelf platform.

Replace shelf on the cabinet supports by slotting the wheels on shelf runner on to the wheels on the support and then sliding the shelf along the support.

« Back to blog